Rubber has a rough surface and makes great anti-sliders for a bed’s legs. You can cut small pieces from an old bicycle’s tires and stick them under the legs to prevent your bed from slipping over sleek surfaces.
Bed sliding out of place when you land on it a little forcefully is typical in homes with wooden or tiled floors. The beds are usually lightweight, and the floors are incredibly smooth, resulting in no friction between the two.
My sister lives in a condo in South Dakota with hardwood flooring. The dry weather makes the floor even more slippery, and on top of that, she is a fan of minimalistic and petite furnishing.
Eventually, she complained of her bed slipping out of place whenever one of her wildly energetic toddlers jumped on it. She was horrified at a possible mishap that could injure one of her kids.
Therefore, I searched the internet for how to stop a bed from sliding and came up with a few hacks and products that seemed helpful. We tried plenty of them and found eight of them pretty efficient.
8 Ways To Stop Your Bed From Sliding
Here’s a list of all the methods that are fruitful enough to stop your bed from sliding;
Method 1: Cover The Floor With A Carpet
You can stop your bed from sliding by placing a carpet or a thick rug under it. Carpets have a rough surface, so they can make up for the smoothness of the floor and keep your bed in place.
However, after several weeks of use, your carpet or rug may have permanent indentations where your bed’s legs rested. It is okay if you don’t intend to use the rug elsewhere – the grooves may even contribute to keeping your bed locked in place. But these grooves will be unsightly if you move your carpet in the future.
Method 2: DIY Rubber Stoppers
Sticking rubber pieces beneath your bed’s legs effectively increases the coefficient of friction between them and the floors. You can cut bits from any rubber lying around or buy some from a hardware store. We cut up pieces of an old bicycle tire.
All you need to do is, draw the outline of your bed’s legs on the piece and cut using scissors. Next, stick the pieces beneath the legs using superglue or any adhesive suitable for furniture. Make sure the edges are clean and not very visible from a distance. And voila! Your furniture will be anchored in place.
Method 3: Use Leg Covers
An efficient product to stop your bed from sliding is bed leg covers. These are woven pieces that take up the contours of the furniture’s legs and have a rubber base. They are pretty helpful if your bed has petite legs.
They may be a little visible from afar because of their height. But you can always get matching ones or paint and style them in your unique way. Regardless they do the job perfectly well, and the non-slippery bottom renders a bed immovable.
Method 4: Shift The Bed
If all else fails, try moving the bed and rest it beside a wall. It will be less likely to move and slide out of place with support from two sides. This method is not entirely slip-proof as the bed can still move in two directions, but it still provides temporary relief.
My sister used this strategy before I could come over to her place and fix her bed sliding problem, and it saved her from any unfortunate incidents.
Method 5: Use Gripping Pads
These non-slip rubber pieces available in the market are scored on the bottom and sticky on the top. Then they are readily available, pretty cheap, and resizable to fit all shapes.
Putting them beneath your bed’s legs is a breeze. Place the sticky side over the leg and cut the excess around the edges. The grooved base adds to their efficiency.
Method 6: Fixate The Headboard
For those heavily committed to anchoring their beds permanently, one way of doing it is attaching the headboard to the wall. However, the job requires skills and permanent damage to the furniture and the wall.
You will need to drill holes in your bed’s headboard and the wall and join them using excessively long screws.
Method 7: Add Weight To Your Bed Frame
If you don’t want to alter your bed’s legs, why not try adding a little weight to your bed frame? This hack targets bed sets that are excessively lightweight and move with the slightest jerk.
You could attach dumbbells or metal slats to your bed frame. Also, make sure the weights are balanced on both sides, or your bed will become even more prone to movement.
Method 8: Use Caster Cups
Caster cups serve the primary function of protecting your wooden floorings from scratches and marring. They were initially used to protect the wheels under a piano, but you can use these to prevent your bed from moving.
Caster cups can have a rubber, felt, or carpeted bottom that helps keep your bed in place and increase the amount of friction between the flooring and the bed legs. Make sure you get the size corresponding to your bed’s legs. They are usually available in a set of four.
FAQs Related To Stopping Your Bed From Sliding
Why do beds slide on wooden floors?
If your bed is lightweight or the legs are petite, they won’t create enough friction to keep them in place. And when your floor is smooth, like wooden or tiles, the coefficient of friction decreases even more.
Moreover, an uneven floor, malaligned bed legs, and an unbalanced weight distribution throughout the furniture make it prone to move.
How can I prevent my bed from sliding without damaging my bed or the floor?
Most tricks and hacks require you to nail or glue your bed or floor. But a few methods require no physical distortion of the two. These techniques include moving your bed to a corner, placing a carpet under it, and using caster cups beneath its legs.
