Pick up the big pieces of kinetic sand with your hands. Use a vacuum cleaner to remove the more minor details stuck in the carpet fibers. For more challenging cases, apply one-third (1⁄3) cups of white vinegar with 2 to 3 cups of distilled water, and rinse thoroughly.
Kinetic sand is all magic and a fantastic play tool for kids and even adults. When my baby brother got his first set of kinetic sand, he was so into it that he abandoned most of his action figures, except Spiderman, of course.
However, he was messy with it too. One time, he spilled the kinetic sand on the carpet, and it got into the carpet fibers. Even with a quick response, getting the kinetic sand out of the carpet was challenging.
If you’re like me and want to know how to remove kinetic sand from your carpet, I’ve compiled a list of 5 simple techniques to assist you.
Let’s get this party started!
Proven 5-Step Cleaning Method for Kinetic Sand Removal
Here are five steps to get remove kinetic sand from your carpet:
Step 1: Sweep the Kinetic Sand
Kinetic sand isn’t messy like regular sand, so it’s easy to spot. If it’s scattered all over, the first thing you should do is sweep as much as you can from the carpet. Try to form big balls of sand from the pieces on your carpet.
Use the big sand ball to dab up small pieces from the carpet and use a brush or sweep to further remove smaller pieces from the carpet fibers. It’s better to do this as fast as possible.
Step 2: Prepare and Spray a Vinegar Solution
Vinegar has been proven repeatedly to help get rid of tough stains from surfaces. White vinegar, especially, is very effective in removing kinetic sand, color stains, and stickiness from your carpet without harming it.
To prepare the solution, mix 1⁄3 (one-third) cup of vinegar with 2 to 3 cups of distilled or deionized water. Spray the solution onto the affected region(s) until its damp.
Allow the solution to sit for at most 3 minutes. Use a white fabric or paper towel to wipe the solution from the carpet.
Note: You can opt to use regular tap water in the white vinegar mix. However, it is much better and safer to use distilled or deionized water.
This is because water doesn’t go too well with kinetic sand. Besides, distilled water is much safer and will not affect any carpet debris.
Repeat this process until the vinegar mix is finished. This ensures you hit all the right spots.
Step 3: Apply Detergent Solution
Detergent is effective in dealing with kinetic sand and should be used to wash off any side effects of the vinegar. To start, add a few drops of a dishwater detergent of your choice to a cup of water.
Pour the mixture into a spray bottle and spray onto the areas the vinegar has touched. Dab up the mixture from the carpet with a rag or towel until the whole mix is exhausted.
Step 4: Rinse and Dry
Sprinkle a moderate amount of water in the affected region. This boosts the effectiveness of the vinegar and detergent. Wait for two to three minutes and blot up the wet areas with a dry rag or paper towel to remove excess water.
If the carpet stays wet for too long, it will do more harm than good. You can sundry it, use silica gels or put your carpet under the fan to dry it out.
You should know that using a hairdryer on your carpet is never a good idea as the heat can damage it.
Step 5: Vacuum Your Carpet
This step is only necessary if you’re trying to remove kinetic sand from a matted-down carpet. Use any vacuum of your choice to remove any kinetic sand you may have missed and add finishing touches.
Pro tip: Do not use a steam cleaner while vacuuming.
Alternative Method To Remove Kinetic Sand From Your Carpet
The “Club Soda” remedy is a simple alternative that you can utilize. It’s a tried-and-true method for getting rid of persistent stains and kinetic sand from carpets.
- To do this, squirt club soda on the kinetic sand region.
- Allow it to sit for a few minutes (3 at most).
- Brush away the loose sand from your carpet with a brush.
With this procedure, you can also use a steam vacuum.
Are kinetic sand and moon sand the same thing?
Both are made with standard sand but have different coatings. Kinetic sand has been coated with poly(dimethylsiloxane), a stretchable and hydrophobic material that is commonly found in Silly Putty.
The primary purpose of kinetic sand’s thick, dense covering is to keep the sand together so it may be cut and molded without causing a mess.
This allows both children and adults to create sandcastles on their desks without stray sand particles accumulating in places they don’t want them. The adhesive characteristics of kinetic sand make cleanup a breeze.
On the other hand, magic sand is granular and usually with a bright color. It has a thin layer of trimethyl hydroxy silane, making it hydrophobic and brittle. Magic sand may be sculpted into fascinating shapes like a castle or an apple underwater without causing a murky suspension of sand grains.
When you pour the water out of a magic sand sculpture, it collapses into a mound of entirely dry sand, rather than keeping its shape like wet beach sand.
FAQs About Getting Kinetic Sand Out of Your Carpet
Is There A Need To Sanitize Kinetic Sand?
There’s no need to sanitize your kinetic sand. It has 0% water properties and doesn’t hold germs. But if you feel like disinfecting it, freeze the sand or let it dry under the sun.
How Long Does Kinetic Sand Last?
Kinetic sand can last for years when it is appropriately preserved and kept from moisture. Store it away from water or in a ziplock bag.